Website Banner
   
  เมนูหลัก
 
     
 
  บริษัท รัตนาทร จำกัด
 
 
     
   
  ก่อตั้งมากว่า 33 ปี เป็นตัวแทน จำหน่ายสินค้าจากต่างประเทศ อย่างเป็นทางการในประเทศไทยของสินค้า ดังต่อไปนี้  
     
  1. “FUJI” AIR TOOLS
จากประเทศญี่ปุ่น
 
     
  2. “KAKUTA” TOGGLE CLAMP
จากประเทศญี่ปุ่น
 
     
  3. “F.S.K.” MOUNTED POINT
จากประเทศญี่ปุ่น
 
     
  4. “QUIRI” GAS SPRING
จากประเทศฝรั่งเศส
 
     
  5. “ALL AMERICAN” Bushing
and Workholding Solution
จากสหรัฐอเมริกา
 
     
  ซึ่งเป็นสินค้าที่ใช้ในอุตสาหกรรม ยานยนต์และชิ้นส่วน, แม่พิมพ์, เครื่องใช้ไฟฟ้า, เฟอร์นิเจอร์, ต่อและซ่อมเรือเดินทะเล ฯลฯ  
     
 
     
   
     
  จำนวนผู้เข้าชมเว็บไซต์  
   
     
 
 TOOLING COMPONENTS

  • CLAMPS
  • CLAMP SETS



CAM ACTION CLAMP
This low profile, quick action Cam Action Clamp has a jaw that pivots forward and downward simultaneously when the handle is turned.
It locks positively in any position within its 180° turn enabling it to hold parts that vary slightly dimensionally.
Extended base Cam Action Clamp used on machine table.

 

HOOK CLAMP ASS'Y. SOCKET HEAD CAP SCREW STYLE
This Hook Clamp Assembly has excellent holding power, and is ideal for jig & fixture quick build systems.
The hook itself is made of hardened alloy steel, ground and spring loaded. The Hook rotates through 360°, allowing easy removal and loading of work pieces.


HOOK CLAMP ASS'Y. STUD AND NUT STYLE
This Hook Clamp Assembly has excellent holding power, and is ideal for jig & fixture quick build systems.
The hook itself is made of hardened alloy steel, ground and spring loaded. The Hook rotates through 360o, allowing easy removal and loading of work pieces.


HOOK CLAMP MOUNTING STANDS
The unique clamp riser blocks are made of alloy steel.


HOOK CLAMP RISER BLOCKS
The unique clamp riser blocks are made of alloy steel.


LEVELING CLAMP
Throw away the parallel bars!
COMPLETE AS SHOWN: INCLUDING GRADE 8 T-SLOT BOLT NO ADDITIONAL PARTS REQUIRED
- MULTI-FUNCTION - Level, locate, stop and clamp work piece all in one stroke.
- FAST SET UP - All clamp parts stay together, so parts don't get lost.
- CONVENIENT CLAMPING - Tighten either the flange nut or the rear support.
- VERSATILE - Fully adjustable round tipped front strap and self-aligning rear support allow for clamping of slightly uneven work pieces.
- PRECISE - The hardened steps are ground to ±0.0005 accuracy.
- STRONG - T-slot bolt is grade 8 stron . Clamp strap is made of medium carbon steel heat treated to RC 36. Strong enough for most applications yet soft enough not to damage cutter.
Clamp work piece at five different levels: 0, 1/2, 1, 1-1/2, 2
(Use two or three clamps for optimal results)

 
 
 
 

TOP BRASS PIVOT CLAMP SET
ALL AMERICAN'S PIVOT CLAMP OFFERS THESE IMPORTANT ADVANTAGES:
- Super hold, easy set-up.
- Applications: milling die work, drilling, boring, tapping, and welding.
- Instant height adjustment special spring maintains height adjustment to facilitate repeated clamping and unclamping.
- Spherical washer ensures even clamping.
- Brass shim protects your machine table.
- Design permits use on irregular shapes and varying sizes without blocks and shims.
Pivot Clamp Set includes 2 each of: CLAMPS, T-SLOT NUTS, STUDS, SPRINGS, SPHERICAL FLANGE NUTS, SPHERICAL WASHERS, FLAT WASHERS
ALL AMERICAN'S Pivot Clamp offers safe, sure holding power, with up to 90% time savings over conventional set-up methods. Not only are they fast and easy to set-up, but they offer exceptional clamping force! No more fumbling with complicated clamping kits trying to find the proper size pieces.

 
 
 

PIVOT CLAMP ONLY (BODY)
PIVOT CLAMP SPECIAL SPRING & WASHER SET
PIVOT CLAMP FRONT & REAR SHIM SETS (WITH SCREWS)

 

STRAIGHT LINE SCREW CLAMP
Screw Clamps offer screw-action clamping with variable, yet positive clamping force. Unlike toggle-action clamps, Screw Clamps will tolerate irregularities in work size. The more you turn the handle, the tighter the clamping force. A lever turn of 180o will advance the spindle by 3/8".
Screw Clamps combine positive screw-action clamping with the swiftness of a toggle clamp. Turning action is converted through a hardened triple acting screw thread set into strong clamping pressure.
An average operator weighing 140 LBS. can easily produce 1000 LBS. of clamping pressure using wrist action alone.
The front end of the shaft is tapped so a screw extension, or special adapter, can be added. The Clamp can be mounted parallel, or perpendicular to the Tee-slots. The Screw Clamp can also be mounted directly onto fixture bases.

 
 
 

CLAMP SUPPORTS
Includes: Washer, Spring and Shaft Collar.
BLACK OXIDE FINISH.


SHAFT COLLARS
BLACK OXIDE FINISH.


VERTICAL LIFT CLAMP
FOR PERFECT PARALLEL ALIGNMENT of the machine side of the part to your machine table. All American's vertical lift clamp does the job with absolute accuracy and less set up time.
The lower jaw moves up on the threaded spindle to two different heights 180o opposite, tightening the part. Both jaws rotate 360o. Work the clamp action by lowering the quick acting cam to turn the cam clockwise and the core screw draws the lower jaw upward.

 

CENTER CLAMPS

HI-RISE CLAMPS

PLAIN CLAMP
CASE HARDENED, BLACK OXIDE FINISH


SERRATED END CLAMP
Teeth match all Step Blocks,
CASE HARDENED, BLACK OXIDE FINISH


SOFT CLAMP
Mild steel clamp for easy modification.
BLACK OXIDE FINISH


STEP CLAMP
Case hardened.
BLACK OXIDE FINISH


TAPPED END CLAMP
Case hardened.
BLACK OXIDE FINISH


TAPPED END CLAMPS (CASE HARDENED-BLACK OXIDE FINISH)

FORGED TAPPED PLAIN CLAMPS (FORGED HIGH TENSILE CARBON STEEL-BLACK OXIDE FINISH)

FORGED "U" CLAMPS (FORGED HIGH TENSILE CARBON STEEL-BLACK OXIDE FINISH)

FORGED FINGER-TIP CLAMPS

FORGED GOOSENECK CLAMPS (FORGED HIGH TENSILE CARBON STEEL-BLACK OXIDE FINISH)

FORGED TAPPED GOOSENECK CLAMPS (FORGED HIGH TENSILE CARBON STEEL-BLACK OXIDE FINISH)

DOUBLE ACTION EDGE (LOW GRIP NOSE STYLE)
STYLE - "L" - (LOW GRIP NOSE STYLE)
HEAVY DUTY NUZZLER STYLE - "H" - (HIGH GRIP NOSE STYLE)
HEAVY DUTY NUZZLER STYLE - "S" - (STANDARD GRIP NOSE STYLE)
- Double acting adjustable jaws exert clamping forces both in and down. Low profile provides greater machining clearance
- "V" groove in nose allows a positive grip on round parts and corners.
- Removable aluminum nose cap prevents damage to workpiece.

 
 

EDGE CLAMP SPACERS 
-Spacer is used to increase the height of the Edge Clamp and in turn lower the nose profile.
-Spacer is adjustable to allow for breakthrough clearance.
-Spacers are low carbon steel, case hardened and ground for precise locating of the workpiece.


KITS (Nuzzler® Edge Clamp)
Kit Contains:
-4 Low Grip Clamps
-4 Standard Grip Clamps
-4 T-slot Nuts
-8 Washers
-1 T-Handle Wrench
-1 Holder

 

KITS (Nuzzler® Edge Clamp) 
Kit Contains:
-6 Low Grip Clamps
-6 T-Slot Nuts
-6 Washers
-1 T-Handle Wrench
-1 Holder
For material information see individual components.


REPLACEMENT PARTS FOR DOUBLE ACTION EDGE CLAMPS

T-HANDLE WRENCH


ALUMINUM NOSES


ADJUSTMENT SCREWS


CLAMP WASHERS


CLAMP SPRINGS


STACK CLAMP SET

STACK CLAMP
For a unique, fast, easy to use clamping system. HERE'S HOW WE STACK UP! SERIES 311 - Stack Clamp Features: All black oxide finish Strap clamp, stud, support and spherical flange nut/washer are all made of heat treated steel Support knob has hex socket on the end for allen key Spherical flange nut and washer will provide proper seating
ECONOMICAL FAST AND EASY: Reduce set up time by 50 to 80 percent. Easy set up. Just bolt in place. Everything is at your finger tips ready to go. Eliminate fumbling with complicated clamping kits, trying to find proper size pieces.
COMPACT DESIGN: Stack Clamps use 50% less table space leaving more room for set ups. Variable fine height adjustment allow full surface clamping versus line contact clamping. Provides good tool clearance.
VERSATILE, HEAVY DUTY: Modular blades increase utilization. Three blocks give 7 clamping height combinations. Ideal for both conventional and N C Mills. Quickly grips and holds securely odd shaped work pieces. Clamping force 5,000 lbs. (Using 1/2" stud). Extra high clamping capacity up to 24" using a 12" stud.
ADAPTABLE: Stack blocks are not heat treated allowing modifications for special fixtures for unusual work holding applications.

 
 
 
 
 

FULL CONTACT
The FULL CONTACT™ Clamp is an accurate, strong and quick acting clamp. Each clamp consists of three parts that are easily installed on tooling plates, sub-plates and other fixtures. Once installed, the tooling can be locked in place with a 1/4 turn. The FULL CONTACT™ Clamp sleeve when expanded contacts 100% with the tooling plate or the optional bushing. This eliminates any chatter from clearance tolerances that can occur on other quick release clamps. Repeatability ±0.0005 inches Easy installation Full contact when expanded Quick release Inexpensive The FULL CONTACT™ Clamp is manufactured from 4130 steel and an alloy steel fastener. All parts are coated with a multi- step process that provides: Increased hardness (Rockwell C60-C70) Permanent lubricity Corrosion resistance Low coefficient of friction Abrasion resistance Electrical conductivity
Among other applications the FULL CONTACT™ Clamps are used for accurate (±0.0005 repeatability) positioning and holding down the fixture plate to the base plate. Forinstallation instructions please refer to the next page.

 
 
 
 
 

CLAMP JIG
  • BUSHING PLATE
  • BASE PLATE



Home l Products l About us | Services | Download | Contact us | News
  RATTORN CO.,LTD.
53/18  Daratorn Building Floor 2  Soi Vibhavadi Rangsit 50,
Vibhavadi Rangsit Road, Ladyao, Jatuchak,  Bangkok 10900
Tel : 02-9410481, 082-4852888    Fax : 02-9410489
บริษัท รัตนาทร จำกัด
53/18 อาคารดาราทร ชั้น 2 ซ.วิภาวดีรังสิต 50 แขวงลาดยาว
เขตจตุจักร กรุงเทพฯ 10900
Tel : 02-9410481, 082-4852888   Fax : 02-9410489
Current Pageid = 378