Website Banner
   
  เมนูหลัก
 
     
 
  บริษัท รัตนาทร จำกัด
 
 
     
   
  ก่อตั้งมากว่า 33 ปี เป็นตัวแทน จำหน่ายสินค้าจากต่างประเทศ อย่างเป็นทางการในประเทศไทยของสินค้า ดังต่อไปนี้  
     
  1. “FUJI” AIR TOOLS
จากประเทศญี่ปุ่น
 
     
  2. “KAKUTA” TOGGLE CLAMP
จากประเทศญี่ปุ่น
 
     
  3. “F.S.K.” MOUNTED POINT
จากประเทศญี่ปุ่น
 
     
  4. “QUIRI” GAS SPRING
จากประเทศฝรั่งเศส
 
     
  5. “ALL AMERICAN” Bushing
and Workholding Solution
จากสหรัฐอเมริกา
 
     
  ซึ่งเป็นสินค้าที่ใช้ในอุตสาหกรรม ยานยนต์และชิ้นส่วน, แม่พิมพ์, เครื่องใช้ไฟฟ้า, เฟอร์นิเจอร์, ต่อและซ่อมเรือเดินทะเล ฯลฯ  
     
 
     
   
     
  จำนวนผู้เข้าชมเว็บไซต์  
   
     

 TOOLING COMPONENTS

  • NUTS
 
UNIQUE QUARTER TURN T-SLOT NUT
Easy to use:
1) Clean T-Slot.
2) Insert 1/4 Turn Nut as shown, or install stud or bolt 
directly into 1/4 Turn Nut. Place into slot and rotate.
Hot Forged, Heat Treated, Black Oxide Finish.

ROTARY T-SLOT NUT
Add Studs and clamp straps without tearing
down previous set-ups.
Supplements standard T - Slot Nuts.
Seven sizes are available, covering 3/8",
1/2", 5/8" and 3/4" stud diameters with
different slot widths.
Case hardened alloy steel. Last thread closed.

T-SLOT NUTS
RC In Mid 40's
Last thread Incomplete to prevent stud from
turning through bottom of nut Into machine tool&
Conform to TCMA standards. Tapped thru
T-nuts are available upon request. T-slot Nuts
are undersized to fit machine table slot.
*ENGLISH T-SLOT NUT WILL FIT THIS METRIC
MACHINE T-SLOT.
CASE HARDENED.
BLACK OXIDE FINISH.

METRIC T-SLOT NUT
Black Oxide Finish.
Case hardened.
Dimensions in millimeters.
Threads metric.
The last thread is incomplete on T-Slot Nuts
to prevent stud from turning through bottom
of nut into machine table.
Tapped Through T-Slot Nuts are also available
- to order Tapped Through, add a " T " after
the part number.
Special sizes quoted on request.

STAINLESS STEEL T-SLOT NUTSNEW!
304 Stainless Steel
The last thread is incomplete on Stainless Steel T-Slot Nuts to prevent the stud from turning through the bottom of the nut. Stainless Steel T-Slot Nuts are undersized to fit the machine table slot.

  
COUPLING (EXTENSION) NUTS
CASE HARDENED.
BLACK OXIDE FINISH.

METRIC COUPLING EXTENSION NUTS
Black Oxide Finish.
Case Hardened.
All dimensions in millimeters.
Coupling Nuts can be used to join two or
more studs to achieve a desired length.

FLAT HEAD ACORN NUTS
The closed end of the acorn nut protects stud
threads from damage and keeps out grit and chips.
HARDENED, BLACK OXIDE FINISH.

LOW CROWN ACORN NUTS
Light - Low Crown.
HARDENED - BLACK OXIDE

SWIVEL NUTS
Hardened pad remains stationary upon
contacting part being clamped. This allows
rigid clamping without marring or moving part.
CASE HARDENED.
BLACK OXIDE FINISH.

FLANGE (COLLAR) NUTS
  • UNC COARSE THREAD
  • UNF FINE THREAD
CASE HARDENED
BLACK OXIDE FINISH

METRIC FLANGE NUTS
Black Oxide Finish.
Case Hardened.
All dimensions are in millimeters.
When used with spherical washers, flange nuts will equalize

STAINLESS STEEL FLANGE NUTS NEW!
416 Stainless Steel

SPHERICAL FLANGE (COLLAR) NUTS
CASE HARDENED
BLACK OXIDE FINISH

STAINLESS STEEL SPHERICAL FLANGE (COLLAR) NUTS NEW!
416 STAINLESS STEEL

SPHERICAL NUT ASSEMBLIES
CASE HARDENED
BLACK OXIDE FINISH
Assembly consists of 269-00 series and
bottom half of 276-00 series.

STAINLESS STEEL SPHERICAL NUT ASSEMBLIES NEW!
416 STAINLESS STEEL

SWIVEL TYPE FLANGE (COLLAR) NUTS
Head rotates but washer remains stationary
upon contact and holds rigidly without marring
work piece.
CASE HARDENED - BLACK OXIDE FINISH.

CHECK NUTS
Check Nuts prevent backing off during operation
due to chatter or vibration. Check Nuts can be
used in conjunction with many other components
such as Knurled Head Screws, Torque Screws,
Hand Knob Assemblies, Toggle Shoe Clam
assemblies and many other tooling applications.
Furnished with all Torque Head Screws with
Swivel Pads.
BLACK OXIDE FINISH.

HEAVY HEX NUTS
CASE HARDENED, BLACK OXIDE FINISH


HEAVY HEX JAM NUTS
CASE HARDENED, BLACK OXIDE FINISH

KNURLED LOCK NUTS
MANY SIZES FUNCTIONALLY INTERCHANGE OR CONFORM TO T.C.M.A . STANDARDS.
(Drilled Holes For Spanner Wrenches)
CASE HARDENED, BLACK OXIDE FINISH

HEAVY DUTY EYENUTS NEW!
Forged Carbon Steel, C1030
Heat-Treated to ASTM A105.

T-NUT AND STUD SETS
Each set contains 38 pieces.
	24 Studs with flats 4 ea.  3", 4", 
                5", 6", 7", 8"  lg.
	4   Coupling nuts
	4   Flange nuts
	4   T-Slot nuts
	1   T-Slot cleaner
	1   Holder
Expanded capability when used with step block
and clamp set.

METRIC T-NUT AND STUD SETS
Each set contains 38 pieces.
	24 Studs with flats 4 each of
                6 lengths
	4   Coupling nuts
	4   Flange nuts
	4   T-Slot nuts
	1   T-Slot cleaner
	1   Holder
Expanded capability when used with metric
step block and 
clamp kit ( AA Part # 302-00M to 302-25M)

  

Home l Products l About us | Services | Download | Contact us | News
  RATTORN CO.,LTD.
53/18  Daratorn Building Floor 2  Soi Vibhavadi Rangsit 50,
Vibhavadi Rangsit Road, Ladyao, Jatuchak,  Bangkok 10900
Tel : 02-9410481, 082-4852888    Fax : 02-9410489
บริษัท รัตนาทร จำกัด
53/18 อาคารดาราทร ชั้น 2 ซ.วิภาวดีรังสิต 50 แขวงลาดยาว
เขตจตุจักร กรุงเทพฯ 10900
Tel : 02-9410481, 082-4852888   Fax : 02-9410489
Current Pageid = 394